Related Manuals for Techni-Lux DE-Spider810
Summary of Contents for Techni-Lux DE-Spider810
- Page 1 Spider810 Information specifically for: DE-Spider810 This manual contains important information. Please read before operating fixture.
- Page 2 It is the owner’s responsibility to provide invoices for proof of purchase, purchase date and dealer or distributor. If purchase date can not be provided, warranty period will start at manufacture date. It is the sole discretion of Techni-Lux to repair or replace parts or equipment.
-
Page 3: Table Of Contents
Table of Contents Specifications ..........................4 Unpacking ........................... 5 Power ............................5 Mounting ............................. 5 Setup and Operation Modes ...................... 6 Control Panel Menu ........................6 Control Panel Menu Table ......................6 DMX Channel Layout ........................8 ... -
Page 4: Specifications
Specifications Fixture Overview Motorized tilt with Dual Bars: Tilt: 85° Multi- Colors via RGB color mixing 8 x 10W CREE 4 in 1 RGBW LEDs Color Strobe Electronic Dimming 0-100% Auto with Master/Slave Modes ... -
Page 5: Unpacking
Unpacking Immediately upon receipt, carefully unpack and inspect the fixture to verify that all parts are present and have been received in good condition. If any parts appear damaged from shipping or the shipping carton shows signs of mishandling, notify the shipper immediately. Retain carton and all packing material for inspection. -
Page 6: Setup And Operation Modes
Setup and Operation Modes The following refers to the different modes that are available on this fixture via the Control Panel display. All functions are selectable from the display menu of the fixture. Auto Mode: The unit will automatically chase through the different colors and movements. - Page 7 The following table describes the control panel’s menu options and settings. Menu Description DMX Address. Press Enter to select the start address value. Use the up/down keys to select the desired start address. Press Enter to confirm. Select head operating direction,"_"...
-
Page 8: Dmx Channel Layout
DMX Channel Layout This fixture features 2 different DMX Channel modes: 7 or 12. Using the 12 Channel mode provides the most features, however it takes up the most channels of DMX. The different channel assignments are shown below. Note that the channel order maybe different for each of the modes. -
Page 9: Channel Dmx Mode
12 Channel DMX Mode... -
Page 10: Dmx512 Control
DMX512 Control Fixtures require a "Start Address" from 1 to 512, setting the first DMX channel containing data for the fixture (see DMX Background). Before addressing fixtures, consult the manual of the system’s DMX controller to select a desirable addressing scheme. Valid Start Addresses range from 1 to 512. -
Page 11: Dmx Start Address
DMX Start Address To place the fixture in DMX mode, press the MENU key, then using the UP/DOWN keys get to the Address Menu Option. Press ENTER and using the UP/DOWN buttons, set the start address number for this particular unit in the DMX chain. Once selected, press ENTER again to save your selection. -
Page 12: Accessory Items (Sold Separately)
Accessory Items (sold separately) Order Code Description CLAMP-MEGA/B Mega Heavy Duty Aluminum Clamp – Black CLAMP-CBHALF Half Cheeseborough Coupler 300kg Max Load SAFETYCABLE18B Safety Cable Black 18” SAFETYCABLE18S Safety Cable Silver 18” CA-XLR3/5 Pre-made 5’ 3-pin XLR Cable CA-XLR3/10 Pre-made 10’ 3-pin XLR Cable CA-XLR3/25 Pre-made 25’... -
Page 13: Dmx-512 Background
Data Negative (S- or Cold) are common in the audio industry. In either case, pin numbers are the same Data Positive (S+ or Hot) and carry the same signals. n/c (not used) n/c (not used) 10900 Palmbay Drive • Orlando, FL 32824 U.S.A. www.techni-lux.com...