Page 1
Introduction and safety informations page 1 Technical features and lamps page 2 Before using page 4 Main supply connection page 5 Lamp's installation, replacement and setting page 6 DMX signal connection page 7 Control panel and configuration (XS1200) page 8 Menu tree options (XS1200) page 10 Menu tree options (XS700/B)
INTRODUCTION Thank you for using the XS, our moving head fixture completely manufactured in light alloy and plastic material, with an optic system of incredible performance and a modern and reliable electronics, can be smartly used anywhere. To make the most of its possibilites and for a correct functioning of this unit in the years to come, we suggest you to read carefully this manual before connecting or putting the spot into use.
Page 3
XS 1200 TECHNICAL FEATURES • LAMPS (OSRAM) Lamps HMI 1200W/S XS HMI 700W/DE XS HMP 575 DE XS Colour temperature 6000° K 5.600° K 6.000° K Lamp life 750 hours 500 hours 500 hours Working voltage Working current 12.7A 7.7A Luminous flux 110.000 lm...
Page 4
XS 700/B TECHNICAL FEATURES • LAMP (OSRAM) Lamps HMP 575 DE XS Colour temperature 6.000° K Lamp life 750 hours Working voltage Working current 7.7A Luminous flux 60.000 lm Colour rendering index (Ra) > 85 Remote lamp ON/OFF by DMX. Reset by DMX and/or panel Automatic lamp re-strike •...
STEP 2 STEP 1 STEP 3 STEP 5 STEP 4 BEFORE USING 1) Open the top of the box, take out the foam protection and the sides polystyrene and put it on a flat plane to operate. Don't handle the fixture by taking it by the bracket or the head, but always by using the special handles on the base. 2) Read all cautions and warnings on the user's manual and particularly page 1 prior to install this equipment.
pict. 1 MAIN FUSE - 6X30 TYPE 12A T (XS700/B) MAIN FUSE - 2X5X20 TYPE 10A T (XS1200) POWER INPUT L = LIVE (Brown) N = NEUTRAL (Blue) = EARTH (Green yellow) pict. 1/a MAIN SUPPLY CONNECTION WARNING The equipment must be earthed. If this rule is not followed, the warranty will be void. Read all cautions and warnings on page 1 prior to install this equipment.
LAMP'S INSTALLATION OR REPLACEMENT In case of replacement of the lamp or maintenance, do not open WARNING the fixture unless 5 minutes have passed from the switching off. 1) Disconnect power before lamp’s installation, replacement or servicing (service personnel). Wear gloves and goggles. 2) Unscrew the pawls (A) on the back of the head fixture.
Page 8
CONNECTION TO THE DMX SIGNAL The connection of the DMX signal to the XS must be made by using the signal input XLR 5 pin or XLR3 pin connectors which are located on the rear panel of the XS. (pict.4) The pin nomenclature of the connectors for the connection to the DMX signal is listed in the table.
SUMMARY OF THE PROGRAMMING FUNCTIONS OF THE XS1200 pict. 5 PRESS SIMULTANEOUSLY TO RESET THE FIXTURES CONTROL PANEL OF THE XS 1200 To control the fixture, to setup it, to check the DMX line and the lamp, on the front panel of the fixture there are a graphic 128x64pixel lcd display, 3 led BCD display, 4 led and 4 keys.
Page 10
DIMM/SHUTT (to select dimmer mode, timeout) To select the dimmer/shutter options press OK. It is possible to select the dimmer mode (MOD1/MOD2) the shutter mode (MOD1/MOD2), the insertion of the shutter during the color change and the shutter change, the time-out when the DMX signal it is not present. To go back to the options without making any change, press the ESC button.
Page 11
Menu Options of the XS 1200 (LCD graphic display) ———— XS 1200 ———— Version 1.00 Serial 10001 DMX001 Next 021 Lamp TENT 1200W 92V Press any key pict. 6 ADDRESS... Chan DMX Next Ch Channels PAN-TILT Pan Inv Tilt Inv Resolution 8/16b Advanced...
Page 12
SERVICE Format Reset Lamps Hours Calibration -> Calibrat 1 -> C/E Wheel Gobo Wheel Prism Wheel Calibrat 2 -> Focus Shutter Iris Frost Calib YYYY Offset +127 BALLAST Parameters … V Lampd I Lampd V PFC Power Tent Lamp xxxx Advanced ->...
Page 13
SUMMARY OF THE PROGRAMMING FUNCTIONS OF THE XS 700/B Default message ! CXXX (XXX= channel) Press any key to access to the menu. To select a menu and to change a numeric value press UP o DOWN. To select a menu and to confirm the value/option selected press ENTER. To go back to the options without making any change, press the ESC button.
XS 1200: USE IN DMX 512 If you want it is possible to choose a reduced resolution (8 bit) for the PAN/TILT motion of the XS 1200 by occupying 18 DMX chan nels, or a high resolution (16 bit) by occupying 20 channels. 8 or 16 BIT MODE SELECTION From the main display, press a key, and use the Up and Dn keys up to when the option PAN/TILT is shown on the display, select it by press ing OK and the sub-menu will appear (Pan Inv, Tilt Inv, Resolution, Adavnced ->).
Page 15
XS 700/B: USE IN DMX 512 If you want it is possible to choose a reduced resolution (8 bit) for the PAN/TILT motion of the XS 700/B by occupying 15 DMX chan nels, or a high resolution (16 bit) by occupying 17 channels. 8 or 16 BIT MODE SELECTION From the main display, press a key, and use the Up and Dn keys up to when the option PAN/TILT is shown on the display, select it by press ing OK and the sub-menu will appear (Pan Inv, Tilt Inv, Resolution, Adavnced ->).
Page 16
THE COMPLETE DMX VALUES LIST OF THE XS 1200 (art. 03061) 20 Channels - 16 bit CHANNEL FUNCTION DESCRIPTION DECIMAL PERCENT IRIS BEAM SIZE Min beam size Max beam size 100% COLOR COLOR WHEEL Full beam 0..8 0%..3% White/Green Green 29..35 11%..13% Green/Magenta...
Page 17
Continue XS 1200 DMX listing: 20 Channels - 16 bit CHANNEL FUNCTION DESCRIPTION DECIMAL PERCENT FILTERS White 0..41 0%..16% 42..83 17%..32% Light Blue 84..125 33%..49% Dark Blue 126..167 50%..65% Bicolor 1 168..209 66%..81% Bicolor 2 210..251 82%..98% Bicolor 3 252..255 99%..100% GOBO B GOBO WHEEL...
Page 19
THE COMPLETE DMX VALUES LIST OF THE XS 700/B (art. 0306) 17 Channels - 16 bit CHANNEL FUNCTION DESCRIPTION DECIMAL PERCENT IRIS BEAM SIZE Min beam size Max beam size 100% COLOR COLOR WHEEL Full beam 0..8 0%..3% White/Green Green 29..35 11%..13% Green/Magenta...
Page 20
Continue XS 700/B DMX listing: 17 Channels - 16 bit CHANNEL FUNCTION DESCRIPTION DECIMAL PERCENT FILTERS White 0..41 0%..16% 42..83 17%..32% Light Blue 84..125 33%..49% Dark Blue 126..167 50%..65% Bicolor 1 168..209 66%..81% Bicolor 2 210..251 82%..98% Bicolor 3 252..255 99%..100% GOBO B GOBO WHEEL...
MAINTENANCE AND CLEANING It is recommended, to ensure the best performances of your fixture for a long time, to periodically clean the parts shown as fol- low. Excessive dust, smoke and moisture are cause of bad performances. Alwais take care that the air grid (on the back of the cover) are clean.
Page 22
SPARE PARTS, TECHNICAL DRAWINGS and SCHEMATIC DIAGRAMS PARTI DI RICAMBIO, DISEGNI TECNICI e SCHEMI ELETTRICI XS 1200 SPARE PARTS SP60 BRACKET SP61A LATERAL BRACKET BASE BOX LATERAL COVER SP61 LATERAL BRACKET SP62 ADHESIVE HANDLES SP63 TILT CROWN SAFETY HOOK UNSHAPED BASE COVER SP64 CROWN SUPPORT SP65...
Page 23
SP115 DMX BOARD SP205 MOTOR SP282 GEAR SP116 MAIN FILTER BOARD SP206 MOTOR SP284 WHEEL SP117 FUSEHOLDER SP208 ZOOM FLYWHEEL SP285 SP118 POWER INPUT CONNECTOR SP209 PACKING RING SP287 COLOUR WHEEL SP119 3 PIN MALE CONNECTOR SP210 ELEC. BOARD SUPPORT PLATE SP295 PACKING RING SP120...