Hazard Symbols; Damage Prevention Messages; Safety Label Locations; Saw Features - MK Diamond Products MK-470 Owners Manual, Parts List & Operating Instructions

Hazard Symbols

Electrical Shock!
Never touch electrical wires or components while the motor is running. Exposed, frayed or worn electrical motor and/or water
pump wiring can be sources of electrical shock which could cause severe injury or burns.
Accidental Starts!
Before plugging the equipment into an electrical outlet, ensure that the ON/OFF switch is in the "OFF" position to prevent
accidental starting. Unplug unit before performing any service operation.
R o t ating or Moving Pa r t s !
Keep hands, feet, hair, and clothing away from all moving parts to prevent injury. Never operate the motor with covers, shrouds,
or guards removed.

Damage prevention messages

Other important messages that are designed to help prevent damage to your MK Diamond 470 tile saw, other property, or the
environment are preceded by the word, "notice."
n o t i c e
Your MK-470 Tile Saw or other pro p e rty could be damaged if you don't follow instru c t i o n s .
California Proposition 65 Message
Warning
suitable to the material being saws or drilled. In accordance with OSHA (29 CFR Part 1910.1200). Diamond Blades improperly
used are dangerous. Comply with American National Standards Institute Safety Code B7.1 and Occupational Safety and Health
Act covering: Speed, Safety Guards, Flanges, Mounting Procedures, General Operating Rules, Handling, Storage and General
Machine Conditions.

Safety Label Locations

Safety labels are located according to the drawing below. The labels contain important safety information. Please read them
carefully. These labels are considered a permanent part of your saw. If a label comes off or becomes hard to read, contact MK
Diamond or your dealer for replacement.
R

Cutting Head

The 7 inch (178mm) blade capacity yields a depth of cut of 1-3/4". The hinged blade guard allows easy blade changes.
Sawing and drilling generates dust. Excessive airborne particles may cause irritation to eyes, skin
and respiratory tract. To avoid breathing impairment always employ dust controls and protection
Item Location
H2

Motor

H3 Motor
J3 Motor
7 inch (178mm) blade capacity
The MK-470 Tile Saw is a versatile cutting machine designed to use diamond blades. Its function is to cut a
variety of materials to include ceramics and certain types of stone. The MK-470 is compact and lightweight,
and incorporates features found on larger professional models. This saw is engineered as a self-contained
unit consisting of a powerful universal motor, removable water reservoir and water recirculating system, and
quality diamond blade. The motor operates on standard 120V current, and the water pump is conveniently
energized by the motor.
Motor
The MK-470 features a powerful right angle drive universal motor with the following specifications:
115V 50/60Hz
5.3 AMP
Maintenance free sealed pinion shaft and gear assembly
The heavy-duty pinion shaft and gear assembly are permanently lubricated and sealed within the gear box.
Description
GFCI Warning label
Receptacle warning label
General safety warnings
1/2 Horsepower
5,500 RPM
Part #
155678
154822
155806
470 TILE SAW
2