Getting Started; Installing The Battery In The Telephone; Charge Battery - BELGACOM DDS 100 User Manual

2

Getting started

2.1
Charging the telephone
•

Installing the battery in the telephone

Position the battery in
the slide following the
mark on the label
•

Charge battery

Connect the charger and
place the telephone in the
charging holder
Characteristics of the mains power adapter
Entry: 230 V - 50 Hz
Exit: 12 V DC - 500 mA
The battery is charged. The light is on and the battery icon is displayed.
Charge the telephone regularly. The telephone can be switched on or off.
If the telephone is not used and not charged for a period of several weeks, remove
its battery and store it separately.
The DDS 100 functions exclusively with the Ni-Mh battery, and the DDS 200
with the Li-Ion battery.
10
Other
Slide it until it clicks into
place
Battery charging time
DDS 100: ~ 5 h 00
DDS 200: ~ 3 h 00