How To Mount Your Remote Control - Fanimation MA7966 Owner's Manual

How to Mount Your Remote Control (Option #1)
1. Unthread two screws from the wall switch plate.
(Figure 1)
2. Install the control bracket with two #6-32x 3/4" screws.
And push the four plastic plug to cover the screw holes.
(Including in the control).(Figure 2)
How to Mount Your Remote Control (Option #2)
1. Unthread two screws from the wall switch plate.
(Figure 1)
2. Install the control bracket with two #6-32x 1" screws.
And push the four plastic plug to cover the screw holes.
(Including in the control).(Figure 2)
How to Mount Your Remote Control (Option #3)
1. Drill the two 1/4" holes in wall and use the M6 plastic
anchor pushed into the holes. Install the control bracket
with two #3- 1" self tap screws. Push the four plastic plug
to cover the screw holes. (Including in the control).
(Figure 1)
Figure 1
Figure 1
15
Figure 2
Figure 2
Figure 1