Troubleshooting - bon BSM-182i User Manual

Troubleshooting

Try these if you have trouble in using the monitor. Call for Service if you can't
solve the problem even after you tried these solutions.
Symptom
Power isn't turned on
Screen is Black and All Button
Lights are On
in startup process
Screen is Black on Startup and
there's neither BON Logo nor "No
Signal" Display, but Buttons are
Working
There's a delay in BON Logo
Display on Startup
BON Logo appeared on Startup, but
No Screen Output when Input
Signal Connected
"No Signal" appears on the Screen
Solution
Check Connectivity of Power Cable between Outlet and the Monitor.
Press and Hold Power button for more than one second.
Try with Other Monitor or Electric Device using the same Power
Cable.
Reconnect the Power and Restart the Monitor.
(Call for Service if the Symptom appeared more than 3 times)
Reconnect the Power and Restart the Monitor.
(Call for Service if the Symptom appeared more than 3 times)
It is normal and No Reaction Required.
Remove Input Cable and Check if "No Signal" appears on Screen.
- restart the Monitor if you can't see "No Signal"
- Make Monitor "Factory Default" and Try again and Try again
- Check the Cable Connectivity
- Try with Different Cable
- Check the Input Format and Frequency
- Try with Different Input Device. If successful, the Failed Input
Device may Generate Non-Standard Signal (Please Inform Us its
Model Name).
Check the Input Selection.
Make Monitor "Factory Default" and Try again.
Try with Different Input Cable.
Check the Cable Connection.
Check if the Input Format and Frequency is Supported.
Try with Different Input Device. If successful, the Failed Input
Device may Generate Non-Standard Signal (Please Inform Us its
Model Name).
31