Grundig GCA-B0323T Owner's Manual page 10

DIS [OFF, ON] :
Digital Image Stabilisation will set the anti-shake compensation.
Note:
- If you set DIS to ON, the compensation area will be enlarged as set in the digital zoom
factor.
- If you set the digital zoom factor to greater than the enlarged zoom factor for the
compensation, the DIS function will be deactivated.
- EXT: This enables an auto switch between DAY and NIGHT mode using the
brightness level detected by the photocell.
Attention:
This camera has an integrated IR illuminator with photocell. Therefore we recommend
the DAY/NIGHT menu setting EXT to get the best results.
WHITE BAL :
If you want to adjust the colour scheme, use the WHITE BALANCE function.
DIGITAL ZOOM [ON, OFF] :
You can set the digital zoom factor and position. When the zoom factor and position are
defined, the digital zoom function will operate.
DETAIL [0~3] :
Controls the horizontal or vertical distinction.
V-SYNC [INT] :
This camera model is set to fixed INT (Internal Syncronisation).
AGC COLOR SUP [LOW, MID, HIGH] :
Adjust the color scheme according to the AGC value.
REVERSE [OFF, H/V, H/V] :
Mirrors video signals horizontally, vertically, or both.
POSI/NEGA [+, -] :
Output as it is or mirroring the video brightness signal.
8
DAY & NIGHT [DAY, NIGHT, AUTO, EXT] :
- DAY: If set to DAY, it will be fixed to
colour mode regardless of the ambient
conditions.
- NIGHT: If set to NIGHT, it will be fixed to
Black-and-White mode regardless of the
ambient conditions. If you press the SETUP
key, the NIGHT submenu is selected.
- AUTO: The camera will automatical
switch between DAY and NIGHT mode,
according to the lighting condition. If you
press the SETUP key, the AUTO sub-menu
is selected.
English