Subscribe to Our Youtube Channel
Related Manuals for Grundig GCH-K1327T-1
Summary of Contents for Grundig GCH-K1327T-1
- Page 1 Owner's Manual HD Video Cameras GCH-K1327T-1 2 Megapixel Full HD CMOS Bullet Ex-SDI Camera IR 42 LED WDR GCH-K1327T-1.159.1.18.03.2015 © ASP AG...
-
Page 3: Table Of Contents
Content: 1. Important Safety Instructions 2. Package Contents 3. Installation 4. Part Names 5. Control Stick 6. OSD Menu 1. Lens 2. Exposure 3. Backlight 4. Day&Night 5. White Balance 6. DNR (Digital Noise Reduction) 7. Image 8. DIS 9. Motion 10. -
Page 4: Package Contents
If this product fails to operate normally, contact the nearest service center. Never disassemble or modify this product in any way. (GRUNDIG is not liable for problems caused by unauthorised modifications or attempted repair.) To prevent fire or electric shock, do not expose the inside of this device to rain or moisture. -
Page 5: Part Names
Ex-SDI for further distances, please use a higher quality cable (RG6 approx. 400-600m). All Grundig Ex-SDI Cameras support also the HD-SDI standard so that they can be used with HD-SDI Recorders that do not support Ex-SDI signals. -
Page 6: Osd Menu
6. OSD Menu 1. Press the SET key to access the menu mode. 2. Select the desired feature by using the UP/DOWN direction (/\ \/) of the SET key. If an ENTER arrow (↵) is displayed next to the feature, press the SET key to access the feature's menu. -
Page 7: Lens
6.1. Lens Here you can configure the lens setting. LENS [DC, MANUAL] : If you are using a lens with manual Iris, set this item to MANUAL. If you are using a DC controlled lens, set it to DC. 6.2. Exposure When selecting ↵, the following submenu will appear. -
Page 8: Backlight
As the AGC level increases, the overall screen gets brighter but the level of noise will also increase at the same time. 6.3. Backlight To overcome difficult light situations, the GRUNDIG HD-SDI cameras feature different options to improve the image quality. HLC (High Light Compensation):... -
Page 9: Day&Night
WDR: The WDR (Wide Dynamic Range) function works to correct excessive light within the frame to produce a usable image. When the image has simultaneous bright and dark areas, it makes both areas distinct. If you select WDR, a submenu appears where you can make finer adjustments. -
Page 10: White Balance
AUTO: The camera will automatically switch between DAY and NIGHT mode, according to the lighting condition. If you press the SET key, the AUTO sub-menu is selected. - SMART IR [OFF, ON]: Activate or deactivate the Smart IR function. This will reduce the shutter speed, if the image is overexposed in B&W mode. -
Page 11: Dnr (Digital Noise Reduction)
AWB (Auto White Balance): In this mode, white balance works within its colour temperature range. This mode computes the white balance value output using the colour information from the entire screen. It outputs the proper value using the colour temperature radiating from a black subject. - Page 12 GAMMA [0.45 ~ 0.75] : Changes the gamma curve of the camera. MIRROR [ON, OFF] : Mirrors the image horizontally on the screen. FLIP [ON, OFF] : Flips the image vertically on the screen. D-ZOOM [1.0x~16.0x] : You can use the up to x16 bi-cubic linear digital zoom. D-WDR [LOW, MIDDLE, HIGH, OFF] : The D-WDR (Wide Dynamic Range) function works to correct excessive light within the frame to produce a usable image.
- Page 13 PRIVACY: Masks areas that you want to hide on the screen. The camera can activate up to 16 privacy masks. When selecting PRIVACY (pressing the arrow sign), a submenu will appear where you can choose to set up up to 8 polygonal or up to 16 rectangular privacy masks.
-
Page 14: Dis
- POLYGON [ON, OFF]: If you are selecting ON, this submenu will appear. Here you can set up polygonal privacy masks. > ZONE NUM [0 ~ 7]: Select a mask out of the 8 mask areas and set the options below for the selected mask. -
Page 15: Motion
6.9. Motion This function is used to detect moving objects in the monitored area. When choosing ON, the following submenu will appear where you can adjust the settings for the MOTION function. DET WINDOW: When you select this submenu, you can activate 4 different motion detection zones and define their position. -
Page 16: System
QUICK ZOOM [OFF, ON] : Activates the digital zoom function if a motion is detected. If you choose ON, you will enter the submenu where you can make finer adjustments. - ZOOM SPEED [LOW, MIDDLE, HIGH]: Configures the speed of the digital zoom. - TRACKING [OFF, ON]: Activates the tracking functionas soon as a moving object is detected. - Page 17 FRAME RATE [720_25p, 720_50p, 1080_25p, 1080_50p] : Choose a frame rate and resoultion for the transmission. FREQ [50Hz, 60Hz] : Select between a 50Hz or a 60Hz transmission, depending on your power frequency. LANGUAGE [ENG] : Currently only the English language is available for the OSD menu. CAM TITLE [ON, OFF] : Here you can activate the display of the camera title.
- Page 18 Specifications GCH-K1327T-1 Image Sensor 1/3" CMOS Sony Exmor 2 Megapixel Pixels - Total 1952(H) x 1116(V) Pixels - Effective 1944(H) x 1104(V) Scanning System Progressive Image Size 1920x1080, 1280x720 Frame Rate 30/60, 25/50 fps at 1080p; 30/60, 25/50 fps at 720p...
- Page 19 Power Consumption Weight 1.14 kg Dimensions (wxhxd) 99 x 223.5 mm Dimensions English...
- Page 20 EC Declaration of Conformity GCH-K1327T-1 2 Megapixel Full HD CMOS Bullet Ex-SDI Camera IR 42 LED WDR It is hereby certified that the products meet the standards in the following relevant provisions: EC EMC Directive 2004/108/EC Applied harmonised standards and technical specifications:...
Need help?
Do you have a question about the GCH-K1327T-1 and is the answer not in the manual?
Questions and answers