Table of Contents
Advertisement
7 – Recording Cassette Tapes
This unit can record to cassette tapes. The following
procedures explain how to prepare for recording by
setting the reverse mode and selecting the input and
then actual recording. This explanation assumes that the
unit's power is ON and that a recordable (write-protect
tabs not removed) cassette tape has been loaded already.
Preparing to record
Selecting the reverse mode
Use the
switch to set the unit to record on
REV MODE
one or both sides.
: After recording on both A and B sides, the unit
Ë
stops.
: After recording on either the A or B side, the
ï
unit stops.
NOTE
If ä is selected, the unit functions as though Ë had
been selected. In other words, after recording on both A
and B sides, the unit stops.
Selecting the recording source
Using the INPUT key on the remote control
ª
The remote control
INPUT
the input source. Press the key repeatedly to cycle
through the input sources.
The active input source appears on the main area of the
display.
: the playback signal from this unit's CD
INPUT CD
player
: the signal input through the
INPUT UNBAL
jacks on the rear panel
INPUT (UNBALANCED)
36
TASCAM CD-A550MKII
key can be used to select
TAPE
Using the menu
ª
You can also use the menu to set the record source signal
(input source).
1 When in standard display mode, press the
key on the main unit or the remote control to enter
menu mode.
2 Use the
/
keys on the main unit or the remote con-
–
+
trol to show "
TAPE INPUT?
play, and press the
ENTER
the remote control.
3 Use the
/
keys on the main unit or the remote con-
–
+
trol to select the input source from the following
options.
: the playback signal from this unit's CD player.
CD
(default value): the signal input through the
UNBAL
TAPE INPUT (UNBALANCED)
4 Press the
key on the main unit or the remote
ENTER
control to return to the standard display.
NOTE
The CD dubbing function is convenient when recording
a CD. See "Dubbing a CD to a tape" on page 37 for
details.
MENU
" on the main dis-
key on the main unit or
jacks on the rear panel
Advertisement
Table of Contents
