Operation Method; Method To Use Fm Tuner - Inter-m PAM-MPM4 Operation Manual

Operation Method

- Set the volume to minimum before powering on.
- Make sure about properly connection of speaker and input
jack.

Method to Use FM Tuner

1
1
Auto and Manual selection method of broadcasting
.
frequency
1) Select TUNER by pressing the Source button.
2) Frequency decreases or increases if pressing the TUNE ▼/▲
(frequency DOWN/UP) button. You can select desired
broadcasting.
❇Auto Music Select: Auto Broadcasting Station Select mode is
selected if "AUTO" is displayed by pressing the
REPEAT/AUTO button. Operation of the Auto Broadcasting
Station Select starts if pressing the Frequency Up or Down
button and automatically stops at the position of broadcasting
frequency receivable. "TUNED" is displayed on the Display
Window and broadcasting is output.
❇Manual Select: Frequency can be increases or decreases in
unit of 50 / 100 KHz for adjustment by pressing the
Frequency Up or Down button shortly once. Frequency
moves until unhand if holding to press it for a long time. If
broadcasting frequency receivable is selected, "TUNED" is
displayed on the Display Window and broadcasting is output.
2
2
Memory method of frequency and recall of memorized
.
broadcasting channel
1) Select desired frequency with the TUNE ▼/▲ (Frequency
DOWN/UP) button.
2) "▢ " is displayed on the Display Window and the address to
M
save flickers if pressing the MEMORY button.
P M-MPM4 (CD MP3 TUNER Module)
13