Method To Treat Compact Disc (Cd) - Inter-m PAM-MPM4A Operation Manual

Digital interface used in this product, which has format of
S/PDIF (Sony/Philips/Digital/Interface), complies with stan-
dard specifications called IEC958.

Method to treat Compact Disc (CD)

This device is a player only for a CD.
Please use a CD with following mark:
ing part of a case with the left hand and hold the both sides
with the right hand from below.
Take off the CD with lightly holding both sides with the right
hand while pressing the center of the case with right thumb.
■
■ ■
Lightly wipe out the CD with a soft cloth if fingerprint or dirt is
stained on the signal recording surface. There is no sound slot
■
■ ■
like general record in the CD. Wiping out dirt or fingerprint
stained with a smooth cloth if necessary is sufficient. There is
no obstacle to sound quality even if some dirt or fingerprint re-
mains.
Record spray, charge preventing agent, benzene and thinner,
etc should not be used. The surface of a CD may be damaged
■
■ ■
by these chemical drugs as it is a plastic product.
Please keep the disc whose play is completed in a case. If the
disc is bent or damaged, sound may be broken or become im-
■
■ ■
possible to play with the disc.
Avoid of leaving the disc at a place where direct light is shone
or which is disclosed to high temperature or a great of humidity.
■
■ ■
Leaving it for a place where temperature is high may cause
deformation, etc.
Do not paste papers, etc to the character surface or write let-
ters on it.
■
■ ■
8
PAM-MPM4A (CD/USB/Tuner Module)
Make the character surface where
music name, etc is described on if mount-
■
■ ■
ing a CD on the disc tray of the DC player.
Open a case with holding the right end-
■
■ ■