Table of Contents
Advertisement
Support X8X8 Riser Card
Slot
Starpping Pin
Slot1 X8
Riser card side B12 pin to GND
Slot2 X8
Support X8X4X4 Riser Card
Slot
Starpping Pin
Slot1 X8
Slot2 X4
Riser card side B30 pin to GND
Slot3 X4
mini-PCIe slot:
MINI_PCIE1 (mini-PCIe slot) is used for PCI Express mini cards.
mini-SATA slot:
MSATA1 (mini-SATA slot) is used for mSATA cards.
Installing an expansion card
Step 1.
Before installing the expansion card, please make sure that the power
supply is switched off or the power cord is unplugged. Please read the
documentation of the expansion card and make necessary hardware
settings for the card before you start the installation.
Step 2.
Remove the system unit cover (if your motherboard is already installed
in a chassis).
Step 3.
Remove the bracket facing the slot that you intend to use. Keep the
screws for later use.
Step 4.
Align the card connector with the slot and press irmly until the card is
completely seated on the slot.
Step 5.
Fasten the card to the chassis with screws.
Step 6.
Replace the system cover.
Clock Source
A13 & A14
A5 & A6
Clock Source
A13 & A14
A5 & A6
A7 & A8
14
Advertisement
Table of Contents
