Fujitsu primergy TX150 S2 Configuration Manual page 3

PRIMERGY TX150 S2
Instruction
This document contains basic product and configuration information that will enable you
to configure your system.
Only these tools will ensure a fast and proper configuration of your PRIMERGY server or your complete
PRIMERGY Rack system.
You can configure your individual PRIMERGY servers in order to adjust your specific requirements.
Please follow the lines. If there is a junction, you can choose which way or component
you would like to take.
Go through the configurator by following the lines from the top to the bottom.
The color of the junction means as follows.
Key to
Configuration To Order
Configuration To Order (CTO) is available with PRIMERGY.
Products are delivered with options (HDD, Memory, Backup device, etc.) already mounted as per customer requirements.
1. How shipped
[Main unit]
(1) CPU+Chassis+Memory
Disk array configuration
Physical pack A collection of physical HDDs comprising a RAID.
Logical drive The logical drive (e.g. D: ) as seen by the Operating System.
Partition One of the logical access units into which a logical drive is divided.
Physical pack
HDD
Or
[CTO option]
(2) Mount option in free slots
+
(3) Standard Memory / Upgrade kit HDD
HDD
HDD HDD
Partition 1
Partition 2
And
Logical drive A
Logical drive B
* Drives can be divided into partitions.
Logical drive C
Shipment