Honda EB11000 Owner's Manual page 55

Installation
1. Install the battery tray in the generator, and the battery on the tray.
2. Make sure the battery is on the edge of the battery tray near the fuse
holder. Install the battery set plate.
3. Install the positive ( ) cable to the battery positive ( ) terminal,
make sure to cover the terminal with the terminal cover. Then install
the negative ( ) cable to the battery negative ( ) terminal.
BATTERY SET PLATE
BATTERY TRAY
4. Install the front cover. Be sure to install the cover in the direction
shown below.
FRONT COVER
＋
−
NEGATIVE ( ) CABLE − POSITIVE ( ) CABLE
TERMINAL COVER
UP
＋
−
＋
FUSE HOLDER
Longer
Shorter
53