1 AC Adaptor Jack
2 Power Switch
3 Connectors
4 Screw Holes for
Brackets
5 Power Contacts
6 Mount Hooks
7 Power LEDs
E-54
Connect the AC adaptor (sold separately) here.
Turns the power on and off.
Use these connectors to connect multiple Cradle-type Dual Battery
Chargers to each other.
The connection bracket attaches here when you connect multiple
Cradle-type Dual Battery Chargers to each other.
Power is supplied to the DT-X200 via these contacts.
These hooks are used to stabilize the Handheld Terminal when
mounting it on the Cradle-type Dual Battery Charger.
These LEDs indicate the power status and the mounting status of
the DT-X200.
Off: Power off
Green: Power on, DT-X200 mounted correctly
Red: Power on, DT-X200 not mounted