Resetting The Handheld Terminal; Performing A Full Reset (Initialization - Casio DT-X200 Series User Manual

Resetting the Handheld Terminal

Resetting the terminal is the same as resetting a PC. Performing a reset causes all
unsaved RAM data to be lost that are in mid-course of inputting and editing, but data
and settings that are already stored in the FlashROM should be unaffected.
Perform a reset to restore normal operation whenever the Handheld Terminal operates
abnormally due to misoperation or some other reason.
Use the pen (stylus) to press the reset switch on the back of the terminal.
This starts the reset operation.
* Do not use a toothpick or pencil or other sharp
object whose tip may break off the reset switch.

Performing a Full Reset (Initialization)

Performing a full reset deletes all data and resets various settings to their defaults.
*Data stored in the Flashdisk folder remain unaffected.
Perform a full reset whenever any one of the following conditions exists.
•
When you want to delete installed programs and settings, and resume the terminal to
the initial condition.
•
When you are no longer able to use the Handheld Terminal because you forgot your
password.
•
When the Handheld Terminal does not operate normally due to a memory problem.
Important!
•
Performing a full reset resets all data to their defaults except stored in the
Flashdisk folder. If possible, backup data of the terminal to a PC or to the
Flashdisk folder. The reset procedure and display message appeared on
performing the reset is according to the model you operate.
E-34