1
USB Client Port
2
AC Adaptor Jack
3
Power Switch
4
Power Supply/Data
Communication
Terminals
5
Terminal Detect
Switch
6
Mount Hooks
7
Power Indicator
LED
E-42
This port is used to transmit system data and fi le data (download,
upload) by connecting the Cradle to a PC using a USB cable
(DT-380USB-A). A dedicated driver must be installed in the PC
before connecting the Cradle to the PC.
Connect the AC adaptor (sold separately) here.
Turns the power on and off.
Power is supplied to the DT-X200 via these contacts. Also used
for data communication.
This switch detects when the DT-X200 is seated correctly on the
Cradle.
These hooks are used to stabilize the Handheld Terminal when
mounting it on the cradle.
This LED indicates the power status and the mounting status of
the DT-X200.
Off: DT-X200 is not installed.
Green: Power on, DT-X200 mounted correctly.