Casio DT-X200 Series User Manual page 50

1 USB Client Port
2 USB Host Port
3 LAN Connection
Status LED
4 LAN
Communication
Status LED
5 LAN Port
6 AC Adaptor Jack
7 Power Switch
8 Selector Switch
9 Power Supply/Data
Communication
Terminals
10 Terminal Detect
Switch
11 Mount Hooks
12 Power Indicator
LED
E-48
This port is used to transmit system data and fi le data (download,
upload) by connecting the Ethernet Cradle to a PC using a USB
cable (DT-380USB-A). The dedicated driver must be installed in
the PC before connecting the Ethernet Cradle to the PC.
This port is used to connect a corresponding USB peripheral
device.
This LED shows the status of the LAN connection.
Off: LAN cable not connected correctly.
Lit orange: LAN cable connected correctly.
This LED shows the LAN operation status.
Off: No communication.
Blinking: Communication in progress.
This port is used for connecting the cradle to a PC or hub via a
LAN cable so that system data and fi le data can be transmitted
(uploaded or downloaded).
The special driver software must be installed in the DT-X200.
Connect the AC adaptor (sold separately) here.
Turns the power on and off.
This switch is used to switch between a USB connection and a
LAN connection.
LAN: LAN
A: USB host
B: USB client
Power is supplied to the DT-X200 via these contacts.
This switch detects when the DT-X200 is seated correctly on the
Ethernet Cradle.
These hooks are used to stabilize the Handheld Terminal when
mounting it on the cradle.
This LED indicates the power status and the mounting status of
the DT-X200.
Off: DT-X200 is not installed.
Green: Power on, DT-X200 mounted correctly.