Using Your Dishwasher; Control Panel - Samsung DW80H994 Series User Manual

using your dishwasher

WARNING: To reduce the risk of fi re, electric shock, or injury to persons, read the IMPORTANT
SAFETY INSTRUCTIONS before operating this appliance.
WARNING

CONTROL PANEL

DW80H994 Series
1
DW80J994 Series / DW80J755 Series
Power
1
Cycle Selector
2
Self Clean
3
(for some models)
Upper
4
(for some models)
Untitled-1 8 Untitled-1 8
2 3 4
When you press the Power button, the light of the most recently fi nished
cycle turns on. When the cycle you selected has fi nished, all other indicator
lights are turned off and the "End" light is illuminated for some minutes.
Then, the Power turns off automatically.
Select the appropriate wash cycle depending on the soil level of your dishes.
After you select a cycle, the Cycle On light for that cycle lights.
Also, the Upper and Lower zone lights turn on by default.
If you want to change the cycle once it has started, press the Reset
button and turn off the dishwasher. Then, turn on the dishwasher again
and select a new cycle.
The default cycle is Normal.
When turning on the dishwasher after it has been reset, the last run
cycle is selected by default.
Select this option to clean the dishwasher TUB. Run with the dishwasher
empty. The Upper and Lower options are turned off by default.
When you select Upper, only the upper rack nozzle is activated.
The lower nozzle will not operate.
Use this feature to wash a small load of dishes or glasses placed in the upper
rack.
When you select Upper, place dishes, glasses, etc. in the upper rack
only. The dishwasher will not wash items placed in the lower rack.
Selecting Upper reduces both the cycle time and the amount of electricity
consumed.
English - 8
5 6 7 8 9 10 11
2015-04-08 8:08:25 2015-04-08 8:08:25