CHECK THESE POINTS IF YOUR DISHWASHER...
Will not start.
It's taking too long
with an operation
The door is not closed
No cycle is selected.
The power cable is not
The water supply does not
The Control Panel is locked.
A circuit breaker is open.
Cold water is being supplied.
English - 28
Check if the door is latched and closed
completely. Check whether the Upper Rack is
properly joined with Duct Nozzle.
Also, Check imbalance assembly of the Upper
Select a proper cycle.
Connect the power cable properly.
Check if the water supply valve is open.
Unlock the child lock, (See page 10.)
Reset the circuit breaker.
Check if the water supply line is connected to a
hot water supply. (Additional time is required to
heat cold water.)