Advertisement
Easy Start Guide
Preparing your VC2000 for first use:
Kindly follow the steps provided below in setting up your VC2000 for first use.
1
Pairing your VC2000 with its Remote Control
WARNING: Ensure that the VC2000's power switch is OFF before proceeding.
2
1
Using a screwdriver, unfasten the
screws of the VC2000's base plate.
2
Insert the VC2000's battery correctly.
Using a screwdriver, fasten the
screws of the base plate again to
hold the battery in place.
3
Connect the VC2000 to the Docking
station.
4
Connect the power adapter to the
Docking station and plug the power
adapter to a power outlet.
To maximize the usage of the VC2000,
allow the VC2000 to charge for 8
hours.
1
Press and Hold the CHARGE button
of the VC2000's Remote control.
2
Turn ON the Power Switch of the
VC2000.
A series of beeps would occur
indicating
between the two devices.
VC2000
a
successful
pairing
Advertisement
Table of Contents
Related Manuals for Aztech VC2000
Summary of Contents for Aztech VC2000
- Page 1 VC2000 Easy Start Guide Preparing your VC2000 for first use: Kindly follow the steps provided below in setting up your VC2000 for first use. Using a screwdriver, unfasten the screws of the VC2000’s base plate. Insert the VC2000’s battery correctly.
- Page 2 Turn ON the power switch, and press the CHARGE button to enter the current time setting. Press the VC2000’s SCHEDULE button to select the correct Day, then press CHARGE button twice to confirm. The Day Light LED would turn ON, indicating a successful setup.
Need help?
Do you have a question about the VC2000 and is the answer not in the manual?
Questions and answers