Related Manuals for Aztech VC2000
Summary of Contents for Aztech VC2000
- Page 1 AZTECH VC2000 Smart Robotic Vacuum Cleaner V1.0 Before using the Robotic Vacuum Cleaner, please read this manual carefully to ensure the safe & proper operation of the robot...
- Page 2 User Manual Legal Notice 2013 © All rights reserved. Version 1.0 No part of this document may be reproduced, republished, or retransmitted in any form or by any means whatsoever, whether electronically or mechanically, including, but not limited to, by way of photocopying, recording, information recording, or through retrieval systems without the express written permission.
-
Page 3: Table Of Contents
User Manual Contents About the Product ....................... 4 Main Features ....................... 4 Package Contents ....................... 5 Device Design ......................6 Device Indicators and Buttons ................... 7 Cleaning Modes ......................8 Device Installation ....................... 9 Installing batteries to the Main Body ..............9 Installing the Virtual Wall’s Battery ................. -
Page 4: About The Product
Day and Night Recognition. The VC2000 can recognize day or night automatically, and will enter into different cleaning modes according to different times. At night, the VC2000 will enter into mute cleaning mode and will not disturb rest (Day is from 8:00 to 18:00 by default). -
Page 5: Package Contents
User Manual Package Contents The package contains the following items: User Manual x 1 pc Mop Set x 1 pc Mop x 1 pc Clean Brush x 1 pc Side Brush x 2pcs Filter x 1pc ... -
Page 6: Device Design
Press this button to exchange between normal cleaning mode and MUTE mute cleaning mode. ALONG Press this button and the VC2000 will enter into edge cleaning mode. SPEED Press this button to adjust your vacuum’s cleaning speed. Turns ON/OFF UV sterilization function. -
Page 7: Device Indicators And Buttons
Indicator scheduled. Indicates if the UV light is enabled or UV Light disabled. Power Indicates the power of the VC2000’s battery. Time/Error Displays the schedule of cleaning/error Code Light encountered by the device. After pressing, the VC2000 will enter into Clean cleaning mode or will pause its cleaning. -
Page 8: Cleaning Modes
This mode can help to clean the dust at the corner of sofas, beds, walls, etc. This cleaning process will last for 25 minutes till the VC2000 returns to the Docking Station Mute Cleaning Mode The VC2000 will complete its cleaning under ultra-low noise and will not affect people’s work or rest. -
Page 9: Device Installation
User Manual Device Installation Please read and follow the instructions written below carefully. You may also use the diagrams provided for reference. Installing batteries to the Main Body 1. Unfasten the base plate’s screw using a screwdriver and open its base plate. 2. -
Page 10: Installing The Docking Station
User Manual BATTERY TIPS: Take out the device’s battery if the vacuum would not be used. Switch off the device first, before taking out its batteries. Do not put its battery in any 45 C environment or even, near water or damp surfaces. ... -
Page 11: How To Start And Pause Cleaning
VC2000 will return to its Docking Station to recharge automatically. Note: If in any case the VC2000 has not been able to return to its Docking Station to recharge (e.g. if the vacuum is in an environment with multiple obstacles, or is too far from its Docking Station) you have to charge your device manually. -
Page 12: How To Schedule Cleaning
The Virtual Wall creates an invisible barrier that Aztech VC2000 will not cross. This invisible barrier can be used to confine the VC2000 to a particular room or area and prevent it from getting too close to electrical or computer cords, delicate objects on the floor, etc. it can be set to block an opening up to seven feet long. -
Page 13: How To Mop
Before performing the maintenance of the VC2000, please ensure that the power switch is OFF. Cleaning the Dust Bin If your VC2000’s dust bin is full, the suction power will be weakened. Please empty the dust bin before and after every use. To Empty the Dust Bin, kindly follow the instructions below: 1. -
Page 14: Cleaning Main Brush And Clean Brush
Also ensure that the side brushes are not stuck underneath the brush bracket. Cleaning the Sensors and the Charging Terminal Turn the VC2000 over and place it on a smooth soft and level surface. Use a soft dry cloth or cleaning brush to clean the sensors and charging terminal. -
Page 15: Cleaning Side Brushes
Pic 2 Pic 3 Cleaning the Universal Wheel 1. Turn the VC2000 over, put it on a smooth soft and level surface, and then pull out the universal wheel. 2. Clean the hair and debris from the universal wheel. 3. Install the universal wheel into the VC2000. -
Page 16: Cleaning The Right And Left Wheel
User Manual Cleaning the Right and Left Wheel Turn the VC2000 over, put it on a smooth soft and level surface, remove the brush bracket Clean the right and left wheels using a dry cloth. Pic 1 Pic 2 Page 16 of 20... -
Page 17: Device Troubleshooting
1. Turn off the power switch, and then restart the VC2000. 2. If the problems still exists after restarting the VC2000. It is suggested to bring the VC2000 to the specified customer care center. Page 17 of 20... -
Page 18: Technical Specifications
User Manual Technical Specifications Cleaner Rated Voltage Lithium-ion Battery DC 14.8V Lithium-ion Battery 2200mA Working Hours 120 minutes Rated Power 20-25W -5℃～40℃ Operating Temperature Range Operating Humidity Range ≤85RH AC/DC adaptor AC 100/240V-50/60Hz DC 24V 1000mA Specification φ360*92mm Weight 3.34kgs Noise Level ＜45dB Dustbin Capacity... -
Page 19: Safety Warnings
Do not touch the power cord or the electric appliance with a wet hand; this may cause electric shock and other personal injuries. Do not use any other charger aside from the one supplied with the VC2000, it may cause product damage, electric shock or fire due to voltage mismatch. ... - Page 20 User Manual Copyright © 2013 Aztech Technologies Pte Ltd (CRN:199800635M). All rights reserved. Page 20 of 20...
Need help?
Do you have a question about the VC2000 and is the answer not in the manual?
Questions and answers