Advertisement
Easy Start Guide
Preparing your VC2000 for first use:
Kindly follow the steps provided below in setting up your VC2000 for first use.
3
Pairing your VC2000 with its Remote Control
WARNING: Ensure that the VC2000's power switch is OFF before proceeding.
1
Connect the VC2000 to the Docking
station.
2
Connect the power adapter to the
Docking station.
3
Plug the power adapter to a power
2
outlet.
To maximize the usage of the VC2000,
allow the VC2000 to charge for 8 hours.
1
Press and Hold the CHARGE button of
the VC2000's Remote control.
2
Turn ON the Power Switch of the
VC2000.
A series of beeps would occur indicating
a successful pairing between the two
devices.
VC2000
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Aztech VC2000
Summary of Contents for Aztech VC2000
- Page 1 VC2000 Easy Start Guide Preparing your VC2000 for first use: Kindly follow the steps provided below in setting up your VC2000 for first use. Connect the VC2000 to the Docking station. Connect the power adapter to the Docking station. Plug the power adapter to a power outlet.
- Page 2 Repeat steps 1 and 2 for the minute settings. Press the CLEAN button to save the setting. To Start Cleaning Turn ON the power switch of your VC2000. On your VC2000, press the CLEAN button. The VC2000 will enter auto cleaning mode and will automatically return to docking station to recharge if needed.
Need help?
Do you have a question about the VC2000 and is the answer not in the manual?
Questions and answers