USER MANUAL CONTENTS SAFETY INSTRUCTIONS...............3 PACKAGE CONTENTS...............6 APPLIANCE OVERVIEW..............6 USING THE APPLIANCE..............7 CLEANING & MAINTENANCE............10 TECHNICAL SPECIFICATIONS............14 SAFETY INSTRUCTIONS IT IS STRONGLY ADVISED THAT YOU READ ALL OF THE PROVIDED SAFETY GUIDES AND OPERATING INSTRUCTIONS IN THIS USER MANUAL FIRST BEFORE USING THE ULTRA-LIGHT STICK VACUUM CLEANER.
Page 4
Electrical Safety: • Only use batteries and chargers supplied by the manufacturer. • Never modify the charger in any way. • The charger has been designed for a specific voltage. Always check that the main voltage is the same as stated on the rating plate. •...
Page 5
Service: • Before using the appliance and after any impact, check for signs of wear or damage and repair as necessary. • Do not use the appliance if any part is damaged or defective. • Repairs should be carried out by a service agent or a qualified person in accordance with relevant safety regulations.
PACKAGE CONTENTS • Easy Start Guide • Switch • Power Supply • User Manual • Dust Cup • Wall Mount Bracket • Warranty Policy • Metal Tube • Long Crevice • Power Brush • 2-in-1 Crevice APPLIANCE OVERVIEW COMPONENTS Switch Metal tube locker Long crevice Metal tube...
USING THE APPLIANCE USING THE TWO-LEVEL SPEED CONTROL SWITCH BUTTON STEP 1 Press the switch button to power on (low power). STEP 2 Press the switch button during the low-power mode for high power. STEP 3 Press the switch button during the high-power mode to power off.
Page 8
USING AS STICK VACUUM CLEANER STEP 1 Connect the dust cup accessory and the handle part together. STEP 2 Attach the metal tube to the body until a click sound is audible. STEP 3 Attach the brush to other end of metal tube.
Page 9
USING AS HANDHELD VACUUM CLEANER OPTION 1 Attach the long crevice to the body until a click sound is audible. OPTION 2 Attach the 2-in-1 crevice to the body until a click sound is audible.
CLEANING & MAINTENANCE CHARGING THE BATTERY STEP 1 BATTERY When the battery power indicator is INDICATOR LIGHT KEEPS BLINKING blinking in red, battery is low. STEP 2 Switch off the vacuum cleaner then place it on the wall mount bracket or any place convenient for recharging.
Page 11
EMPTYING THE DUST CUP STEP 1 Press the metal tube locker and remove the metal tube. STEP 2 Unlock the dust cup locker. STEP 3 Empty the dust cup.
Page 12
MAINTAINING THE FILTER BATTERY LOCKER STEP 1 Press the battery locker to detach the battery from the dust cup. STEP 2 Open the dust cup. STEP 3 Lift the filter case up, then remove the filter. STEP 4 Wash the filter case and HEPA filter.
Page 13
STEP 5 Dry the HEPA filter and filter case completely before reassembling it. STEP 6 After drying, assemble the filter to the case. STEP 7 Place the filter case back into the dust cup. STEP 8 Close the dust cover on the dust cup.
Need help?
Do you have a question about the ASC280 and is the answer not in the manual?
Questions and answers