USER MANUAL CONTENTS SAFETY INSTRUCTIONS..................2 PACKAGE CONTENTS..................5 PRODUCT OVERVIEW..................5 USING THE PRODUCT..................6 CLEANING & MAINTENANCE................7 TECHNICAL SPECIFICATIONS.................11 SAFETY INSTRUCTIONS IT IS STRONGLY ADVISED THAT YOU READ ALL OF THE PROVIDED SAFETY GUIDES AND OPERATING INSTRUCTIONS IN THIS USER MANUAL FIRST BEFORE USING THE PRODUCT. Personal Safety: •...
Page 3
Electrical Safety: • Only use batteries and chargers supplied by the manufacturer. • Never modify the charger in any way. • The charger has been designed for a specific voltage. Always check that the main voltage is the same as stated on the rating plate. •...
Page 4
Service: • Before using the appliance and after any impact, check for signs of wear or damage and repair as necessary. • Do not use the appliance if any part is damaged or defective. • Repairs should be carried out by a service agent or a qualified person in accordance with relevant safety regulations.
USING THE PRODUCT STEP 1 Attach and secure the aluminium tube to the nozzle. To detach the aluminium tube, press the Tube Release Button and pull the tube away from the nozzle. STEP 2 Attach and secure the motorised brush to the aluminium tube. To detach the motorised brush, press the release button and pull the motorised brush away from the tube.
STEP 3 Press the Power Button to switch on/off the vacuum. Press the Speed Control Button to alternative between the two speed options. Air Vent Power Button S p e e d Control Button IMPORTANT: Do not block the air vent. Keep it clean from dust, to prevent the motor from overheating.
Page 8
MAINTAINING THE FILTER STEP 1 Press the Dust Cup Release Button to detach the dust cup from the main unit. STEP 2 Rotate the top of the dust cup counterclockwise to separate it from the dust cup.
Page 9
STEP 3 Lift the filter case up, and remove the filter. STEP 4 Gently rinse the filter case and HEPA filter thoroughly. Ensure the filter case and HEPA filter are completely dry, before reassembling them.
CHARGING THE BATTERY STEP 1 When the Battery Power Indicator is showing only one blinking blue LED, the battery is low. Battery Power Indicator LED Off LED Off Blinking LED Charging Port STEP 2 Plug the charger into the charging port. The battery is full when all three LEDs light up in solid blue.
TECHNICAL SPECIFICATIONS Battery 2000 mAh Li-ion battery Voltage 22.2 V Motor Power 120 W Charging Time 4–5 hours Usage Time 40 minutes (low speed), 25 minutes (high speed) Suction Power 12 Kpa Noise Level 70 db Speed Options High & Low Dust Capacity 0.8 L Product Weight...
Need help?
Do you have a question about the ASC290 and is the answer not in the manual?
Questions and answers