Miele H6800BM Operating And Installation Instructions page 140

Problem solving guide
Problem
The oven lighting does
not switch on.
140
Cause and remedy
The halogen lamp needs replacing.

Danger of burning.
Make sure the oven heating elements are switched
off and that the oven cavity is cool.
The lamp cover consists of two parts, a glass
piece and mounting. It can get damaged if it falls.
Hold the lamp cover securely when removing it so
that it does not fall. Place a tea towel over the floor
of the oven and the open door to protect them.
 Disconnect the appliance from the mains.
 Remove the screw to the lamp cover using a T20
Torx screwdriver, and take off the cover.
 Do not touch the halogen lamp with bare fingers.
Please follow the manufacturer's instructions.
Remove the halogen lamp.
 Replace it with a new halogen lamp (Osram
66725, 230V, 25W, thermally stable up to 300°C,
G9 fitting).
 Replace the glass piece in the mounting, and refit
the lamp cover. Make sure that the lug on the
mounting is correctly located in the notch in the
roof of the oven, then screw the mounting back
into place.
 Reconnect the oven to the electricity supply.