Configure The Tst-902; Rf Setup - Crestron TST-902 Supplemental Manual

Configure the TST-902

RF Setup

On the TST-902 Setup screen, tap RF Setup to display the RF Setup screen.
RF Setup Screen
The RF Setup screen shows RF signal strength, gateway UID, and gateway name. It also
has controls for acquiring the TST-902; setting the RF ID, RF channel, and RF power;
enabling RF roaming; and selecting the series of the control system.
Before a TST-902 can be used with a Crestron control system, it must first be acquired by a
Crestron Extended Range (RF) Wireless gateway (sold separately). To acquire a TST-902,
perform the following procedure:
1. Use a stylus or other thin-tipped object to press ACQUIRE on the gateway to enter
2. On the TST-902's RF Setup screen, tap Acquire. The screen displays an "Acquire
3. When the screen displays an "Acquire OK" message, press ACQUIRE on the
2 • TST-902: 8.7" Wireless Touch Screen
Acquire mode. The accompanying LED illuminates, indicating the unit is ready to
link with the touch screen.
in progress" message, and the TST-902 is automatically acquired by the gateway
within 2 minutes.
gateway to exit Acquire mode. The LED turns off.
Supplemental Guide – DOC. 7750A