Tool Holder, Attachments - Festool TI 15 Instruction Manual

Adjust the speed/impact rate at thumbwheel [1-
6]:
WARNING
Risk of injury, electric shock
Always disconnect the battery pack before any
type of work on the machine!
Festool offers attachments and tool holders for
various applications.
Tool chuck CENTROTEC WH-CE [4]
The tool chuck CENTROTEC WH-CE allows you to
change tools with a CENTROTEC shank in a matter
of seconds.
Always use a CENTROTEC tool chuck to clamp
CENTROTEC tools.
CAUTION
Tool has sharp edges and can cause cutting inju-
ries during a tool change.
Wear protective gloves!
12
Setting 1 = low speed/impact rate
Setting 6 = high speed/impact rate

Tool holder, attachments

4
WH-CE
CENTROTEC
Hexagon socket holder at power tool [5]
Bits can be inserted directly into the hexagon sock-
et holder so that the power tool is lighter and short-
er.
klick
2
1
®
klick
3
4