Settings - Festool TI 15 Instruction Manual

the charging state, temperature and voltage of the
battery pack.
3
3-1
The LED [3-2] on the charger indicates the respec-
tive operating status of the charger.
LED yellow - lit continuously
Charger is ready to use.
LED green - flashing quickly
Battery pack is charged to maxi-
mum capacity.
Changing direction of rotation [1-3]
• Switch to the left = clockwise rotation
• Switch to the right = counterclockwise rotation
Ø 5 mm
3b
3-2 Charger wall mount
The charger TRC 3 has two elongated holes on its
back. It can be mounted on a wall using two screws
(e.g. round head or flat head screw with shank di-
ameter of 5 mm) (see Fig. [3b]).

Settings

Damage to screw and/or workpiece
Adjust the speed/impact rate and impact dura-
tion to the specific application.
LED green - flashing slowly
Battery pack is charged with
reduced current. LiIon is charged
to 80 %.
LED green - lit continuously
Charging is complete or is not
restarted as current charge sta-
tus is greater than 80%.
LED red - flashing
General fault display, e.g. incom-
plete contact, short circuit, defec-
tive battery pack, etc.
LED red - lit continuously
Battery temperature is outside
the permitted range.
96 mm
Adjust speed/impact rate
CAUTION
11