ECS G31T-M7 Manual page 37

APIC Mode (Enabled)
This item allows you to enable or disable the APCI (Advanced Programmable Inter-
rupt Controller) mode. APIC provides symmetric multi-processing (SMP) for sys-
tems, allowing support for up to 60 processors.
1st/2nd/3rd Boot Device (ST3320620AS/BENQ DVD DC DW1810/1st
FLOPPY DRIVE)
Use this item to determine the device order the computer used to look for an
operating system to load at start-up time. The devices showed here will be different
depending on the exact devices installed on your motherboard.
Hard Disk Drives (Press Enter)
Scroll to this item and press <Enter> to view the following screen:
CMOS Setup Utility - Copyright (C) 1985-2005, American Megatrends, Inc.
Hard Disk Drives
1st Drive ST3320620AS
: Move Enter : Select
F1:General Help
Press <Esc> to return to the Advanced Setup page.
Removable Drives (Press Enter)
Scroll to this item and press <Enter> to view the following screen:
CMOS Setup Utility - Copyright (C) 1985-2005, American Megatrends, Inc.
Removable Drives
1st Drive 1st FLOPPY DRIVE
: Move Enter : Select
F1:General Help
Press <Esc> to return to the Advanced Setup page.
Hard Disk Drives
Specifies the boot
sequence from the
available devices.
+/-/: Value F10: Save ESC: Exit
F9: Load Default Settings
Removable Drives
Specifies the boot
sequence from the
available devices.
+/-/: Value F10: Save ESC: Exit
F9: Load Default Settings
Using BIOS
31
Help Item
Help Item