Method 4 - Kodak Scan Station 710 Administrator's Manual

Method 4

9-16
This method allows you to interactively select any of the Scan Station
settings that are available in Settings mode on the Scan Station
touchscreen and modify their values. When the USB drive with the
configuration file is inserted into the Scan Station and recognized, you
will be prompted to update the Scan Station configuration.
NOTE: If a local access password is set, you will be prompted to enter
the local access password.
If you select No, the Scan Station will be placed into local administrative
mode. At this point you can modify most of the Scan Station's settings
and they will be updated when you remove the USB drive.
To configure your USB drive for configuration updates:
1. Select the Configuration tab.
2. Select a configuration file to write to the USB drive.
3. Select File>Export to write the configuration file to a USB drive.
The Save As screen will be displayed.
4. Save the file on the USB drive with the name KSS.xml and click
Save.
For more information see the document entitled, "Configuring User
Settings".
A-61796 September 2014