Fujitsu M3096EX Consumable Replacement And Cleaning Instructions page 5

R p a
eplaCinG the ad
Pad
Pick
Spring
Correct
Pad Assy
M3096EX/GX C
( .)
ssembly Cont
Note:
The Pad Assembly consists of
the Pad, the Pick Spring, and
the Pad Holder.
Pad Holder
• If you receive only the
rubber pad, replace the Pad
according to the following
procedure.
•
•
•
Incorrect
•
ADF Frame
• Insert the new Pad Assembly
into the bigger side of the
mounting holes in the ADF
frame, and then slide to the
right until it locks into place.
• Close the ADF.
R
onsuMablE EplaCEMEnt and
Remove the Pick Spring.
Remove the Pad from
the Pad Holder.
Align the holes in the
new Pad with the pins on
the Pad Holder.
Attach the Pick Spring so
that both ends of the Pick
Spring are located on the
Pad.
C i
lEaninG nstRuCtions