Firmware Upgrade Procedure - Toshiba TDP-T8 Service Manual

Chapter 6

Firmware Upgrade Procedure

I. Factory Mode Introduction
Only functions concerning repair are introduced. Functions not introduced are reserved for
engineering use.
How to enter Factory Mode:
1. Must be with signal input.
2. Hot key: press "ON/STANDBY" "VOL-" "VOL-" "MENU" sequentially to enter Factory
Mode. (See the below pic)
Burn In Mode
Select "Burn In Mode" and then press "Enter" key to enter Burn In Mode.
6-1 S8 T8 T9