Advertisement
MT700 Service Manual
5. Alignment Procedure
5.1. DMD Bias Voltage Alignment
• Check the Label on DMD Chip
Ex : 5954604 –
•
Switch the DIP Switch on DMD Board according to the Red character
B:
A:
5.2. Color Wheel Delay Alignment
5.2.1. Process
Enter the Factory mode "DLP"
pattern to projector. To adjust color wheel delay value until all 32 gray red color is
correct. (Simple method not accuracy)
When user leave the OSD menu, the setting will be automatically saved into memory.
2118C
(Four Types B,C,D,E)
C:
D:
B:
C:
"Color wheel delay" menu and input 32 gray red
E:
D:
23
(XGA)
(SVGA)
ON
1 2
Advertisement
