Chapter 5
Firmware Upgrade Procedure
5-1
Equipment Needed
Hardware :
–
Firmware Cable
–
PC
–
T80 / T90 / T91 / TW90 / MT200 / S80 /
S81/ SW80 Projector
Software :
–
DLP composer
–
DDP2000~1.img
Environment :
–
Windows 98 / 2000 / XP
5-2
Setup Procedure
1.
Connect Firmware cable to Projector and COM1 or COM2 (Serial port) of PC.
Note: If you use DLP Composer Lite V3.2, you have to connect the firmware cable to
COM2 of PC. If you use DLP Composer Lite V3.6, you can connect the firmware
cable toCOM1 or COM2.
Firmware Cable
5-1