Electrical Specifications - Toshiba TDP-T8 Service Manual

No Item
Lamp Door
7
Protection
1-3 Electrical Specifications
No Item
Power
1
Supply
Power
2
Consumption
3 Terminals
Input signal
4
spec.
System Con-
5
troller
Video Com-
6
patibility
Lamp power supply shut off automatically when door open
-Universal AC 100--240V~ 50 / 60 Hz with PFC input
-200W Lamp @ normal operation
-Variance FAN speed control ( Depend on temperature vari-
ance)
-250 Watt +/- 10% at normal operation
-Stand-by mode < 13W
-One D-Sub 15-pin female connector for analog RGB / HDTV
component video
-One D-Sub 15-pin female connector for monitor output
-One 3.5 mm phone jack for audio input
-One 3.5 mm phone jack for audio output
-One Mini DIN 4-pin for S-Video Input
-One RCA Jack for Composite Video Input
-RS232 connector
-PC Signal
-Hsync Frequency 31.35~80 kHz
-Vsync Frequency 56 ~ 85 Hz
-Video Signal RGB (PC)
-Analog RGB 0.7Vp-p, 75 ohm
-Analog RGB 1Vp-p, 75 ohm, Sync. signal
-Separate TTL H,V Sync.
-Composite TTL Sync.
-Video
-Composite video 1Vp-p,75 ohm
-S-video Luminance 75 ohm
-Chrominance 75 ohm
TI DDP2000
Standards :
NTSC: M (3.58MHz), 4.43 MHz
PAL: B, D, G, H, I, M, N
SECAM: B, D, G, K, K1, L
HDTV: 480i/p, 576i/p, 720p, 1080i
Description
Description
1-3
S8 T8 T9