Toshiba TDP-T8 Service Manual page 47

No Step
7 "Download After the firmware is
Complete" successfully loaded, you will
Message see "Download Complete"
message and only the
Power LED is lit (Standby
Mode).
(The FW upgrade will take
about 6 minutes.)
Unplug and re-plug the
power cord of the projector.
8 Checking Power on the projector and
Firmware press "MENU" button to
Version launch OSD menu. Select
"Status display" to check
the firmware version
Procedure
1
2
5-6
Photo
S8 T8 T9