Server Direct Print Settings - Epson TM-H6000IV-DT Technical Reference Manual

Server Direct Print Settings

Use EPSON TMNet WebConfig to perform the Server Direct Print settings, following the
procedures below.
1
Run EPSON TMNet WebConfig from shortcut on the desktop.
EPSON TMNet WebConfig is started.
2
Select [Settings] - [Web service settings], then [Direct print].
The "Server direct print" screen is displayed.
3
Set the following, then click [Apply].
Item
ID
Password
URL
Interval (sec.)
If you perform settings from an external device, enter the following in the URL field
of your Web browser (such as the address bar).
http://"TM-DT's IP address"/webconfig
The default "TM-DT's IP address" for this product is "192.168.192.168".
Specify the user name to be used for Digest authentication for the
server. The specified value is also passed as the ID parameter value
of the form data to be posted to the server.
(This is used to identify multiple printers.)
Specify the password to be used for Digest authentication for the
server.
Set the web server URL for acquiring print data.
After designating it, click "Access test" and check if the URL is prop-
erly specified.
Set the interval for acquiring print data.
Chapter 2 Setup
Description
2
93