Connecting External Devices; Connecting A Mouse And Keyboard; Connecting A Display - Epson TM-H6000IV-DT Technical Reference Manual

Connecting External Devices

Connect external devices as necessary.
If you connect external devices, connect each cable to the connector on the back of the product.
 When connecting an external device to a USB connector, be sure to check this
CAUTION
 When connecting external devices to the USB and powered USB ports, follow the pre-
When pulling out the cables whose connectors do not lock themselves (USB cables and
Line-Out cable), pass the cables through the wire saddle to prevent the cables from coming
off.

Connecting a Mouse and Keyboard

Connect a USB mouse and USB keyboard to the USB.

Connecting a Display

Connect a display to the VGA or the DisplayPort connector.
Connect the display when this product is off.
If you connect the display when this product is on, data may not be properly displayed.
product and the device's manual for the amount of power consumed by the exter-
nal device.
cautions below.
 Confirm the rated current of the external devices by checking the descriptions on the
devices or manuals. Do not use a device whose rated current is unclear.
 Connect the external devices only when those total power consumption is 30 W or
less.
 When you use powered USB ports, make sure that the TM-H6000IV-DT is turned off
before connecting each cable. When the powered USB mode (See
mode setting" on page 73.) is set to Mode 2, also make sure that the AC cable is dis-
connected from a power outlet before connecting it.
Chapter 2 Setup
"Powered USB
2
69