Jeep 2015 Renegade Owner's Manual page 345

• When the 4WD LOCK button is pressed.
• When the Selec-Terrain™ switch is rotated from AUTO
to any other off-road modes.
Active Drive With Low Control — (Trailhawk models
only)
Selec-Terrain™ Switch (Trailhawk)
The 4WD LOW mode helps to improve the off-road
performance in all modes. To enable 4WD Low please
follow the steps below:
Enabling 4WD LOW
With the vehicle stationary, the ignition in the MAR/
RUN or with the engine running, shift the transmission
into DRIVE, REVERSE or NEUTRAL and press the
button once 4WD LOW. The EVIC/DID will display the
message 4WD LOW once the shift is complete.
NOTE: The lights on the Selec-Terrain™ switch may
blink until the shift is complete.
Disabling 4WD LOW
To disable the 4WD LOW mode, the vehicle must be
stationary and the transmission shifted into NEUTRAL.
Press the 4WD LOW button once.
STARTING AND OPERATING 343
7