Jeep 2015 Renegade Owner's Manual page 274

272 SAFETY
Customer Action
1. Turn ignition OFF.
(Turn Signal Switch Must
be placed in Neutral
State).
2. Turn ignition ON.
3. Turn Right Turn Signal
Switch ON.
4. Turn Left Turn Signal
Switch ON.
5. Turn Right Turn Signal
Switch ON.
Customer Will See
Left Turn Light is OFF.
Right Turn Light
BLINKS.
Right Turn Light is ON
SOLID. Left Turn Light
BLINKS.
Left Turn Light is ON
SOLID. Right Turn Light
BLINKS.
Right Turn Light is ON
SOLID. Left Turn Light
BLINKS.
Customer Action
6. Turn Left Turn Signal
Switch ON.
7. Turn Left Turn Signal
Switch OFF. (Turn Signal
Switch Must be placed in
Neutral State).
8. Turn ignition OFF.
9. Turn Hazard Flashers
OFF (Manually).
If a reset procedure step is not completed within 60
seconds, then the turn signal lights will turn off and the
reset procedure must be performed again in order to be
successful.
Customer Will See
Left Turn Light is ON
SOLID. Right Turn Light
is ON SOLID.
Left Turn Light is OFF.
Right Turn Light is OFF.
System is now reset and
the engine may be
started.