Jeep 2015 Renegade Owner's Manual page 295

Hide thumbs Also See for 2015 Renegade:

Table of Contents

• Improper installation of a child restraint to the

LATCH anchorages can lead to failure of the re-

straint. The child could be badly injured or killed.

Follow the child restraint manufacturer's directions

exactly when installing an infant or child restraint.

• Child restraint anchorages are designed to with-

stand only those loads imposed by correctly-fitted

child restraints. Under no circumstances are they to

be used for adult seat belts, harnesses, or for

attaching other items or equipment to the vehicle.

Installing Child Restraints Using The Vehicle Seat

The seat belts in the passenger seating positions are

equipped with a Switchable Automatic Locking Retractor

(ALR) that is designed to keep the lap portion of the seat

belt tight around the child restraint so that it is not

necessary to use a locking clip. The ALR retractor can be

"switched" into a locked mode by pulling all of the

webbing out of the retractor and then letting the webbing

retract back into the retractor. If it is locked, the ALR will

make a clicking noise while the webbing is pulled back

into the retractor. Refer to the "Automatic Locking

Mode" description under "Occupant Restraints" for ad-

ditional information on ALR.

Chapters

Table of Contents