Programming - Miele KM 6112 Operating And Installation Instructions

Programming

You can programme certain settings on
the hob to suit your personal needs.
Several settings can be changed in
succession.
After accessing programming mode, 
(Programme),  (Status) and numbers
will appear in the cooking zone dis‐
plays.
Once you have left programming
mode, the hob will reset automatically.
The process is completed when the
booster indicator lights up briefly.
Do not switch the hob off until the re‐
set process is completed.
42
To access programming mode
 With the hob switched off touch
the  and B I/II sensors at the same
time until the booster indicator flash‐
es.
To set a programme
 Touch the sensor for selecting the
(front) left cooking zone.
 Set the Programme you want with the
+ or - sensor.
To set the status
 Touch the sensor for selecting the
front right cooking zone.
 Set the Status you want with the + or
- sensor.
To save the settings
 Touch the  sensor until the indica‐
tors go out.
To avoid saving the settings
 Touch the B I/II sensor until the dis‐
plays go out.