Safety Features; System Lock / Safety Lock - Miele KM 6112 Operating And Installation Instructions

System lock / Safety lock

The system lock and safety lock are
deactivated if there is an interruption
to the power supply.
Your hob is equipped with a system
lock and a safety lock to prevent the
hob and the cooking zones being
switched on or any settings being al‐
tered.
The system lock is activated when the
hob is switched off. When it is activa‐
ted, the hob cannot be switched on and
the timer cannot be used. The hob is
programmed so that the system lock
must be activated manually. It can be
programmed to be activated automati‐
cally 5 minutes after the hob has been
switched off if the system lock is not
manually activated first (see "Program‐
ming").
The safety lock is set when the hob is
switched on. When the safety lock is
activated,
– the cooking zone power levels and
the timer settings cannot be
changed.
– the cooking zones, the hob and the
timer can be switched off, but once
switched off cannot be switched on
again.
If an unavailable sensor is touched
whilst the system lock or the safety lock
is activated,  will appear in the front
left and  will appear in the front right
cooking zone display after a few sec‐
onds.
Activating
 Touch the + and - sensors at the
same time until  appears in the front
left and  appears in the front right
cooking zone display and a tone
sounds.
 will go out after a short while.
Deactivating
 Touch the + and - sensors at the
same time until  goes out from the
front left and  goes out from the
front right cooking zone display and a
tone sounds.

Safety features

37