Starting Up The System; System Requirements For Pc - Aiphone IS Series Setting Manual

STARTING UP THE SYSTEM

Before making the system settings, confirm that a PC is connected to the central control unit (IS-CCU). The system settings are made
on the PC by accessing the web browser for the settings incorporated with the central control unit (IS-CCU).

System requirements for PC

Your PC and operating environment must meet the following system requirements to make the settings.
Network
Web browser
Starting up the system
1
Connect a PC to the central control unit.
[When connecting a PC to the central control unit
via a router]
RJ45
CAT5e/6
100m (330')
(Straight-through cable)
10BASE-T
RJ45
NOTES:
Select this connection method when you will acquire an IP
•
address automatically by DHCP.
Do not select this connection method if your router does not
have a DHCP server function.
Be sure to connect the CAT5e/6 cable to the LAN ports of both
•
units.
8
10BASE-T Ethernet
Internet Explorer 6.0 or later (with Internet Options SSL 3.0 enabled)
RJ45
Router
CAT5e/6
100m (330')
(Straight-through
10BASE-T
cable)
/100BASE-TX
RJ45
PC
[When connecting a PC to the central control unit
directly]
CAT5e/6 (Crossover cable)
100m (330')
10BASE-T
NOTES:
Select this connection method when using a static IP address.
•
When connecting a PC to the central control unit directly, use
•
an Ethernet crossover cable.
The IP address of central control unit is set to (192.168.0.30)
•
as default. Change the IP address of your PC if needed.
PC
RJ45