Creating Raid Arrays - HighPoint RocketRAID 2700 User Manual

RAID D arrays).
Initia alize - this com mmand is used
they can be used t to create array
5.4 C Creating RA AID Arrays
Initi alizing Disk ks:
Befor re creating a RAID array,
confi iguration info rmation to th
ENTE ER.
Highl light the targe et disks using t
each selected disk k. Once all tar
and a ask you to pre ess Y (yes) to
creat te RAID arrays s.
Warn ning: Initializa tion will destr
disks s that do not c contain critical
Crea ating Arrays s:
Selec ct Create from m the toolbar a
d to prepare d disks for use w
ys.
the disks m ust be initial
he hard disks. . Select the In
the arrow key ys, then select
rget disks have e been selecte
initialize, or N N (no) to canc
roy all pre- exi isting data on
l data.
and press Ente er.
10
with RAID array ys. Disks must
ized. Disk ini tialization wr
nitialize comm mand from th
using Enter. A A numeral wil
ed, press ESC. The utility w
cel. Once initi ialized, these
the selected h hard disks. On
t be initialized d before
rites necessar ry RAID
he toolbar, an d press
l be displayed d before
will display a w warning,
disks can be used to
nly initialize