Preventing mould and odours
■
Drying the tub
(About once a week)
Do not load clothes.
Close the lid and press the [Power On]
button to turn on the washing machine.
Press the [Air Dry] button to select
"0.5" hours.
Press the [Start] button.
■
If you notice mould or an odour
Clean the washing machine with a commercially-
available tub cleaner. (Read the instructions of
the cleaner carefully for information on its use.)
Powdered detergent/
softener case
Remove and rinse the case.
Water supply filters
(When the water pressure is low)
Disconnect the water supply hoses, and clean
the water supply filters with a toothbrush.
●
Disconnecting the water supply hoses:
Be absolutely sure to follow the procedure as
described below. Otherwise, water will spray out.
Close the lid and turn off the water taps.
Press the [Power On] button to turn on
the washing machine.
Press the [Start] button.
Wait for a few seconds, and press the
[Power Off] button to turn off the washing
machine.
Disconnect the water supply hoses from
the washing machine.
Hose
●
When the cleaning is complete, reconnect the
water supply hoses back to the washing
machine. (P.7)
Nut
23