Washing
Before you begin
●
Load clothes in the tub, close the lid, and turn on the water taps.
1
Press
2
Press
a cycle. (P.12)
3
Press
●
The washing machine will measure the
laundry load by churning the laundry without
any water, and display the water level.
4
Open the lid, and add detergent
to the liquid detergent inlet or
powdered detergent inlet in the
amount appropriate for the
water level.
●
If using softener, add it to the softener inlet.
5
Close the lid.
The cycle is complete when the washing machine beeps. (P.15)
Turn off the water taps and take out the clothes.
10
.
repeatedly to select
.
►
Select the water temperature (P.11)
►
Select the wash/rinse/spin settings (P.11)
►
Set the finish time (P.11, Timer Delay)
►
Select the water level (P.11)
►
About Detergent (P.20)
Note
●
You cannot change the cycle once you
press the [Start] button. To change the
cycle, turn off and on the washing
machine, and set cycle settings again.
Display Area
(P.5)