Table of Contents
Advertisement
Integer
Base
Bits
Signed
AAngle
AComplex
510
Entry—for Algebraic
1
Entry—for RPN
2
Returns or sets the integer base. In a program, enter:
Base—for Binary
0
Base—for Octal
1
Base—for Decimal
2
Base—for Hexadecimal
3
Returns or sets the number of bits for representing integers.
In a program, enter:
n
Bits where n is the number of bits.
Returns or sets a flag indicating that the integer wordsize
is signed or not. In a program, enter:
Signed—for unsigned
0
Signed—for signed
1
The following variables are found in the Symbolic setup of
an app. They can be used to overwrite the value of the
corresponding variable in Home Modes.
Sets the angle mode.
From Symbolic setup, choose System, Degrees, or
Radians for angle measure. System (default) will force
the angle measure to agree with that in Modes.
In a program, type:
AAngle—for System (default).
0
AAngle—for Degrees.
1
AAngle—for Radians.
2
Sets the complex number mode.
From Symbolic setup, choose System, ON, or OFF. System
(default) will force this setting to agree with the
corresponding setting in Home Modes.
In a program, type:
Programming
Advertisement
Table of Contents
