Kenwood DPX500BT Instruction Manual page 20

10. Listen to the tuner
10-1. Listening to the radio
Selecting a tuner source
Press the [SRC] button to select "TUNER".
Selecting a band
Press the [1] button.
Pressing the button switches the receiving band
(FM1, FM2, FM3, AM).
Selecting a station
Press the [E] or [F] button.
The tuning mode can be changed. Refer to <10-
6. Tuner setting> (page 41).
38
|
DPX500BT/ DPX300U
10-2. Station preset memory
You can store a station in the memory.
1
Press the [E] or [F] button to select the
station.
2
Press and hold the button ([1] to [6]) to which
you want to assign the selected station.
"STORED" appears and the station is registered.
About the Mix station preset mode
• In this mode, different bands and tuner sources (Radio,
SiriusXM etc.) can be saved in the same preset layer, which
allows you to recall the desired station without switching
between bands or tuner sources.
10-3. Auto memory
You can register 6 stations with good reception
automatically.
1
Select the Tuner source.
Refer to <Source selection> (page 14).
2
Press and hold the [AUDIO] button.
Enter the Function setting mode.
3
Use the [Control knob] to select "SETTINGS"
"AUTO MEMORY".
For how to use the [Control knob], refer to <3-3.
How to select the item> (page 13).
4
Use the [Control knob] to select "YES".
When 6 stations that can be received are stored
in the memory, the process in this mode is
completed.
10-4. Preset tuning
Recalling a station from the memory.
1
Press the [1] button to select a band.
2
Press the button ([1] to [6]) corresponding to
the station you want to listen to.
>
English
39
|